How to Use the Lost Mary BM6000

New to the Lost Mary BM6000? Follow our step-by-step instructions to set up your vape, change replacement pods, charge the battery and deal with common problems.

The Lost Mary BM6000 is a rechargeable prefilled pod kit designed to offer the familiar Lost Mary vaping experience without replacing the entire device when the e-liquid runs out. It uses a 2ml prefilled pod alongside a 10ml auto-refill container, providing 12ml of e-liquid in total and an advertised capacity of up to 6,000 puffs. Once the e-liquid is finished, you replace the pod and refill container while continuing to use the same rechargeable device.

If you've just purchased your first BM6000, here's everything you need to know to get started.

How to Set Up Your Lost Mary BM6000

Setting up the Lost Mary BM6000 only takes a few steps. The main thing is to connect the refill container correctly and allow the e-liquid to reach the coil before vaping.

Lost Mary BM6000 Setup Instructions

• Remove the packaging. Take the device, prefilled pod and refill container out of the packaging, removing any protective stickers.

• Remove the silicone plug. Locate the silicone plug on the side of the device and remove it.

• Open the refill container. Push down and twist the cap on the 10ml refill container to open it.

• Insert the refill container. Slide the container into the device groove, keeping the container facing upwards.

• Allow the pod to saturate. Turn the device upside down and wait approximately 10–15 seconds until bubbles appear, indicating that e-liquid is moving into the pod.

• Inhale to vape. Once the pod is ready, simply inhale through the mouthpiece to activate the device. The BM6000 is draw-activated, so there are no firing buttons or complicated settings to adjust before your first puff.

UK Vape Supply Tip: Don't rush the initial setup. Allowing the e-liquid to reach the coil before taking your first puff helps prevent the dry or burnt taste that can occur when the wicking material hasn't absorbed enough liquid.

How to Refill a Lost Mary BM6000

One of the most common questions about the Lost Mary BM6000 is whether you can refill it with bottled e-liquid. The Lost Mary BM6000 isn't designed for manual refilling. Instead, it uses a replaceable prefilled pod and 10ml refill container.

The container automatically supplies e-liquid to the pod during use, so there's no need to remove the pod and add e-liquid yourself. When the e-liquid is exhausted, you replace the complete compatible refill arrangement.

How to Change Lost Mary BM6000 Pods

Replacing your BM6000 pods is straightforward:

• Remove the empty pod and refill container from your device.
• Unpack your new Lost Mary BM6000 replacement pod and refill container.
• Remove the protective seals and prepare the new refill according to its instructions.
• Insert the replacement components securely into the device.
• Allow the e-liquid to reach the coil before vaping.

You can continue using the same rechargeable BM6000 device, provided it's working correctly. Always choose replacement pods specifically designed for the BM6000. Other Lost Mary pod systems, including the BM600 and Nera, use different refill formats and aren't automatically interchangeable.

You can find compatible flavours in our Lost Mary BM6000 replacement pods range.

How to Charge Your Lost Mary BM6000

The Lost Mary BM6000 has a rechargeable battery and uses a USB-C charging connection. Its digital display allows you to monitor the battery level, helping you identify when it's time to recharge.

To charge your BM6000:

• Locate the USB-C charging port on the device.
• Connect a suitable USB-C charging cable.
• Plug the cable into a compatible USB power source.
• Monitor the battery display while charging.
• Disconnect the device once charging is complete.

A USB-C charging cable isn't included with the kit, so you'll need to use a suitable cable separately.

How Long Does the Lost Mary BM6000 Take to Charge?

Charging time depends on the power source, cable and remaining battery level. Rather than relying on a fixed charging time, use the device's digital battery display to check its progress.

For safe charging, use a suitable power source, keep the device away from excessive heat and avoid leaving it charging unattended or overnight. If the battery is completely flat, it may take a short time for the display to respond after connecting the charger.

Lost Mary BM6000 Not Working? Common Problems Explained

Although the BM6000 is designed for straightforward everyday use, you may occasionally encounter problems with charging, flavour or vapour production. Before replacing your device, there are a few simple checks worth making.

Lost Mary BM6000 Not Producing Vapour

If nothing happens when you inhale, start by checking the battery display. A flat battery is one of the simplest explanations. If the device is charged, check that the pod and refill container are fitted correctly and that you've removed any protective seals. If the e-liquid has run out, you'll need a new compatible replacement pack.

Why Does My Lost Mary BM6000 Taste Burnt?

A burnt taste can occur when the coil's wicking material doesn't have enough e-liquid to absorb.

This may happen if:

• The pod and refill container are empty.
• The replacement refill hasn't had enough time to saturate the coil.
• You've taken several long puffs in quick succession without allowing the wicking to replenish.
• If you've just installed a new refill, allow sufficient time for the e-liquid to reach the coil before trying again.

If the burnt taste persists, stop using the affected pod. Once the wicking material has been damaged, replacing the pod is generally the appropriate solution.

Lost Mary BM6000 Not Charging

If your BM6000 doesn't appear to charge, check the USB-C cable and power source first. Try another suitable cable or charging connection if available, and inspect the charging port for visible dirt or damage.

Avoid inserting metal objects into the port or attempting to dismantle the device. If it still won't charge, stop using it and contact the retailer for advice.

Weak Flavour or Reduced Vapour

A noticeable reduction in flavour or vapour can indicate that the e-liquid is running low. Check the refill container where its contents are visible and make sure the device has sufficient battery charge. If the pod is empty or the flavour has deteriorated significantly, replace the compatible pod and refill container.

How Long Does a Lost Mary BM6000 Last?

The Lost Mary BM6000 is advertised as delivering up to 6,000 puffs from its complete 12ml e-liquid system. However, this isn't a guaranteed number. The actual lifespan depends on how frequently you vape, how long you inhale and your individual usage habits.

Someone who takes occasional short puffs may find their refills last considerably longer than someone who vapes frequently throughout the day. It's also important to distinguish between battery life and refill lifespan. The BM6000 battery can be recharged repeatedly, while the prefilled pod and container need replacing once the e-liquid is exhausted.

If you notice a persistent burnt taste, reduced vapour or an empty refill container, it's worth checking whether your replacement pack has reached the end of its usable life.

Shop Lost Mary BM6000 Kits and Replacement Pods

Once you've set up your Lost Mary BM6000, keeping it in use is straightforward. Recharge the battery when needed and replace the compatible prefilled pod and container when the e-liquid runs out.

At UK Vape Supply, you can shop the Lost Mary BM6000 Prefilled Pod Kit alongside genuine Lost Mary BM6000 replacement pods, with a wide choice of familiar flavours. You can also explore our wider Lost Mary vape kits collection if you're comparing different rechargeable devices.